An effective solution for pooled spills on water
or hard surfaces
While reducing associated risk, liability and costs, Spill Green LS provides a safe, simple and effective means for not just absorption, but microencapsulation of fuels, oils or other hydrocarbon spills on water or on virtually any surface.
Simply broadcast Spill Green LS over the spill area to rapidly absorb and transform the spill into solid clusters, suitable for easy recovery. Hydrocarbons such as crude oil and most fuels will form a solid mat. Spill Green LS is especially effective for clean-up of spills around marine bilge areas, fueling depots, marinas, docks, as well as on open water and shorelines. The technology is flexible and can be used to treat a large variety of contaminants ranging from heavy oils to light fuels and solvents including: Gasoline, Crude Oil, Cutting Fluids, Diesel Motor Oils, Jet Fuel, Hydraulic Fluids, Machine Oils, Power Steering Fluids, Auto Transmission Fluids and Kerosene. Spill Green LS active ingredient (Aqua N-Cap Polymer) is listed with the U.S. Environmental Protection Agency underthe national Oil and Hazardous Substances Pollution Contingency Plan (NCP), Subpart J Product Schedule (40 Code of Federal Regulations Part 300.900) and may be authorized for use by U.S. Federal On-Scene Coordinators and Regional Response Teams in accordance with 40 CFR Section 300.920. Spill Green LS can be used on any body of water and will deliver excellent remediation resulting in low TPH (typically less than 10 ppm) in the affected water depending on conditions. Spill Green LS is environmentally safe and superior to other existing technologies.
Features & benefits:
• Will not absorb water
• Floats indefinitely before and after use, or until recovered
• Effectively absorbs more than 10 times its weight
• Will not stick or adhere to shorelines
or other materials
• Is non-toxic and non-hazardous
• Can be recycled or used as a bulk energy source
• Environment Canada and EPA listed
Spill Green LS requires less product per spill
compared to traditional sorbent
products. Spill Green LS remains afloat while
other products may float for only a limited
time or sink after saturation with the contaminant.
When applied to spills on land,
Spill Green LS is extremely effective
containing a spill from moving along a
roadway or entering into the sewer system
or ditches.These attributes, combined with
rapid, effective spill control performance,
makes Spill Green LS extremely cost
effective. Depending on the application
requirements and environmental conditions,
Spill Green LS is typically applied at the rate
of 1-2 lbs per gallon of spilled hydrocarbon.
Click below to download product sheet & MSDS in pdf format.